Suspended ceilings and plasterboard

Ceilings, coving, partitions and indirect lighting, with joints that do not crack.

Suspended ceiling: metal frame and moisture-resistant board

A suspended ceiling does three things: it hides what runs above, it corrects an uneven ceiling, and it gives the lighting somewhere to live. We do all three, with a steel frame, the right board for each area — moisture-resistant in wet rooms, fire-rated where required — and joints taped in three passes.

Cracked joints almost always come from a frame set too far apart or tape laid badly. It is patient work and it is where the difference shows a year later.

What is included

  • Steel framing sized to the span
  • Standard, moisture-resistant or fire-rated board as the room requires
  • Coving, drops and shaped ceilings
  • Partitions with acoustic insulation
  • Joints taped and skimmed ready for paint
  • Boxes and openings for recessed lighting
After — ceiling with LED lighting in a hexagonal gridDuring — frame built, before wiring upDuring — laser setting out and building the hexagonal frameWalls prepared and the floor protected before applicationRiser in metal framingBefore and after — ceiling repair and coving made good at the openingMicrocement applied to a vaulted ceilingPlasterboard ceiling with coving, joints taped

Request a quote

We come to the site, take measurements and give you a detailed quote broken down by section. No cost, no obligation.

We reply within one working day. If it is urgent, call us.

WhatsApp